Step 01
Inspection & moisture source
We start with a free inspection to find where the mold is, how far it's spread, and what's feeding it. Mold is always a moisture problem first, so we trace the source before we touch the mold.
Mold remediation · IICRC certified · 24/7Mold removal & remediation.
Mold removal & remediation.
Gone for good.
Free inspection, fast. We contain it, remove it, and verify it's gone, and we fix the moisture source so it doesn't come back.
IICRC Certified 25 Years in Utah Direct Insurance Billing 4.9 ★ · 600+ Google Reviews
12,400+
Utah homes restored
Our 6-step process
How mold remediation actually works.
Killing mold on the surface isn't remediation, the spores spread and the moisture source keeps feeding it. Our process contains it, removes it, and proves it's gone.
Step 02
Containment & negative air
Before removal, we seal off the work area with containment barriers and negative air pressure. That keeps spores from spreading to the clean parts of your home while we work.
Step 03
HEPA air filtration
HEPA air scrubbers run throughout the job, capturing airborne mold spores so they don't settle elsewhere. The air is cleaner when we leave than when we arrived.
Step 04
Mold removal
We remove mold-damaged porous materials that can't be cleaned, drywall, insulation, carpet, then HEPA-vacuum and treat what stays, all to the ANSI/IICRC S520 remediation standard.
Step 05
Cleaning & antimicrobial
Every salvageable surface is cleaned and treated with EPA-registered antimicrobials. We also correct the moisture source, because remediation without fixing the cause just buys time.
Step 06
Verification & insurance
We finish with post-remediation verification to confirm the mold is gone, then document the full scope for your insurance and bill your carrier directly. Most homeowners pay only their deductible.
What's included
Everything we do in one phone call.
You call one company. We bring every service the job needs, every tool the job requires, and every form your insurance asks for.
Mold Inspection
A free, thorough inspection to locate the mold, map its spread, and identify the moisture source feeding it.
Containment
Sealed barriers and negative air pressure keep spores from spreading to clean areas during removal.
HEPA Air Filtration
Air scrubbers capture airborne spores throughout the job. The air is left cleaner than we found it.
Mold Removal
Removal of mold-damaged materials and HEPA vacuuming of what stays, to the ANSI/IICRC S520 standard.
Antimicrobial Treatment
EPA-registered antimicrobials applied to every salvageable surface the mold touched.
Moisture Source Repair
We fix the leak, drip, or humidity problem feeding the mold, so it doesn't simply come back.
From the owners
Meet Shelton & Nate.
Nate
Co-owner · since 2001
Our mission is simple: earn your trust, deliver quality, and restore not just your property, but your peace of mind.
Shelton
Co-owner · since 2001
Excellence isn't just a goal; it's the way we approach every single job. We treat your home or business with the same care we'd give our own.
What it costs & how long it takes
Honest numbers. No hidden fees.
Every job is different, but twenty-five years of work means we know the ranges.
What you'll pay
Most homeowners pay only
Their deductible.
When the loss is covered, we bill your carrier directly. A typical residential mold remediation runs $500–$6,000 depending on the size of the affected area, but that's the carrier's number, not yours.
- Free on-site inspection, no obligation, never a charge
- Direct insurance billing, we bill your carrier, not you
- Written scope of work before any cost is incurred
Timeline you can expect
From phone call to finished
2 – 7 days
Most residential mold jobs take 2–7 days, containment, removal, treatment, and verification. Larger or hidden infestations run longer. We give you a clear timeline at the inspection.
- Day 1: Free inspection, containment, air control
- Days 2–4: Removal, cleaning, antimicrobial
- Days 5–7: Drying, verification, sign-off
Voted by neighbors 
Best of Utah Valley.
Best of Utah Valley.
Nine years running.
Every year since 2018, our neighbors have voted us the Best of Utah Valley. Same crew. Same standard. Same answer when the phone rings.
2018· 2019· 2020· 2021· 2022· 2023· 2024· 2025· 2026
Working with your insurance
We talk to the adjuster, so you don't have to.
A restoration claim is half cleanup, half paperwork. We've been handling both for twenty-five years, so you can focus on your family.
Built for the work
The tools and training behind every job.
Commercial-grade equipment. Industry-leading certifications. Real depth, not marketing claims.
Equipment we bring to every job
- HEPA air scrubbersCapture airborne mold spores during and after remediation. The air leaves cleaner than we found it.
- Negative air machinesHold the work area under negative pressure so spores can't escape into clean parts of the home.
- Moisture meters & hygrometersFind and monitor the moisture that feeds mold. We don't close out until the source is handled.
- Antimicrobial foggersApply EPA-registered treatment evenly across surfaces, including the spots a sprayer can't reach.
- Containment systemsSealed barriers and zippered access that isolate the work area for safe, contained removal.
- Air sampling pumpsBefore-and-after sampling so verification is measured, not guessed. Documented for your records.
Certifications & standards
IICRC AMRT (Applied Microbial Remediation Technician) IICRC Water Damage Restoration Technician IICRC Applied Structural Drying ANSI/IICRC S520 Standard RIA Member EPA Lead-Safe Certified Licensed & Insured (Utah)
The standard we restore to
Every job is finished to the ANSI/IICRC S520 Standard for Professional Mold Remediation, the industry's recognized benchmark. We don't bleach mold and call it done, we remove it, treat what stays, and verify the result.
Learn about IICRC standards Where we offer mold remediation
Across every Utah city we serve.
Same crew, same standard, same 60-minute response, across Utah, Salt Lake, Wasatch & Summit counties.
See all service areas or call (801) 922-9130 to confirm coverage for your city.
What Utah homeowners say
600+ five-star reviews, and counting.
Real words from real Utah homeowners on real mold removal jobs.
We found black mold behind a bathroom wall and were terrified. They contained it the same day, removed it properly, and showed us the moisture leak that caused it. The follow-up test came back clean.
No bleach-and-pray here. They fixed the actual leak, not just the mold, and documented everything for our insurance. A year later, still no mold.
600+ reviews and counting. Read them all on Google →
Built different
We're not a franchise. We're not a call center.
Quality Restoration is locally owned by Shelton and Nate. When you call us, you're calling them. When our crew shows up at your door, they're our employees, not a contractor we hired for the day.
That means one phone number, one company, one standard. The same crew that answered your call is the same crew finishing the job, and the same owners signing off on it.
Talk to the owners, (801) 922-9130
Get help todayTell us about the mold.
Tell us about the mold.
We'll take it from there.
Not an emergency? No problem. Fill out the form and our team will reach out within one business hour.
(801) 922-913024/7 emergency line
Serving all of UtahUtah, Salt Lake & Wasatch Counties
Response in 1 hourFor non-emergency inspection requests
Request a free inspection
We'll respond within one business hour.
Common questions
What Utah homeowners ask about mold.
Answers from twenty-five years of jobs across the Wasatch Front.
How much does mold removal cost in Utah?
Most residential mold remediation runs $500 to $6,000, depending on the size of the affected area and whether the moisture source needs repair. We provide free inspections, and most homeowners pay only their deductible when the loss is covered by insurance.
Does homeowners insurance cover mold?
It depends on the cause. Mold from a sudden, covered event like a burst pipe is often covered; mold from long-term humidity or neglected leaks usually isn't. We help review your policy and document the cause for your adjuster.
Is black mold dangerous?
Any significant indoor mold growth can affect air quality and health, especially for kids, older adults, and anyone with allergies or asthma. The safest move is to avoid disturbing it, which spreads spores, and have it professionally contained and removed.
How long does mold remediation take?
Most residential jobs take 2–7 days, containment, removal, treatment, and verification. Larger or hidden infestations take longer. We give you a clear timeline after the free inspection.
Can I remove mold myself?
Small surface spots on non-porous surfaces can sometimes be cleaned, but anything larger, or behind walls, needs containment, because disturbing it spreads spores through the home. When in doubt, get it inspected first.
Will the mold come back?
Not if the moisture source is fixed, which is exactly why we trace and correct it as part of every job. Remediation without fixing the cause just delays the problem, so we don't close out until the source is handled.
Found mold in your home? Don't wait.
Mold spreads through spores and gets worse the longer it sits. Call now for a free inspection and we'll be out fast.
Same-day response Water, mold & smoke Insurance billed direct
Trust the Q.
Quality is our name.